
The ILS12.75 Laser System is our largest platform. Engineered specifically for manufacturing environments, it can handle applications ranging from prototyping to automated manufacturing. The massive processing power of the ILS12.75 allows it to function as a standalone production solution, but it can also be integrated into an assembly line. The ILS12.75 offers a material processing envelope of 48" x 24" x 12", (1219 x 610 x 305mm), the ILS12.75 can be equipped with two lasers ranging in power from 10-75 watts to give you processing power from 10-150 watts.
Laser Interface+ software is the worlds Most Advanced, Powerful and Flexible Laser Print Driver for Material Processing systems! Giving you the choice of automatic or manual control over power, speed, pulses per inch and other system settings. Laser Interface+, combined with the Universal Control Panel (UCP), gives you complete control over your laser processing system.
Rapid Reconfiguration™ allows users to adapt their laser materials processing solution to match their ever-changing business needs – no tools or special training required. At its core, Rapid Reconfiguration allows users to very simply install and reinstall any ULS laser source onto any ULS laser system. On other laser systems, the task of changing laser sources can be complicated and dangerous and can cause several days of downtime.
1-Touch Laser Photo is an exclusive ULS software application that allows you to quickly and easily make almost any photograph laser engravable. It applies special filters to your image and adjusts the contrast and definition appropriately for the material being processed. Using the software is as simple as selecting your target material from a list and cropping, resizing, rotating or mirroring the image as needed.
High Power Density Focusing Optics HPDFO™uses a patented method to expand the laser beam within the focusing carriage. This expansion allows the beam to be focused into a much smaller focal spot, suitable for intricate, tight-tolerance engraving and for direct marking on some metals. In addition to sharper images and expanded material processing capability, systems using HPDFO benefit from lighter-weight delivery optics and an efficient motion system .
|
The Universal Laser ILS12.75 Package includes everything you
need to get started immediately.
- Universal Laser ILS12.75 Platform
- 2 Universal Laser Cartridges - Dual Setup
- Universal Control Panel Software
- Laser Interface+ Software
- Laser Material Starter Kit
- Onsite Setup and Training
Universal Laser Systems ILS12.75 Specs:
- Work Area: 48" x 24" x 12"
- Maximum Part Size: 52.5"W x 30"D x 12"H
- Laser Options: 10,25,30,40,50,60,75 Watts
- Configured for Dual Laser: 10-150 Watts
- Size: 69" Wide x 46" Deep x 44" Height
- PC Connection: USB 2.0
- Power: 220-240V / 16A 2 Lasers
- Weight: 430lbs
Compare other Universal Laser Systems Here
|
Message from Universal Laser Systems
All Universal Laser Systems are custom built to ensure the right system is configured to best fit your current and future needs. All accessories and lasers use interchangeable components, giving you the ability to tailor your custom built system for different applications.
|
Want to learn more about the ILS12.75 and Digital Laser Material Processing?
Download our Free ILS12.75 Digital Laser Material Processing Guide.
Inside you can learn about:
- Universal ILS12.75 Laser Cutting Materials...
- Universal ILS12.75 Laser Marking Materials...
- Universal ILS12.75 Laser Engraving Materials...
- Universal ILS12.75 Laser Photo Imaging....
- And a whole lot more...
|
|
|
Universal Laser Systems can process thousands of materials in ways traditional methods cannot.
Listed below are some of the materials you can successfully process with your Universal Laser System.
|
|
|
|
|
|
|
|
|
|
Want to learn more about the Universal Laser ILS12.75?
Download the Universal Laser ILS12.75 Brochure.
Inside you can learn about:
- Universal ILS12.75 System Features...
- Universal ILS12.75 System Specifications...
- Universal ILS12.75 Power Requirements...
- Universal ILS12.75 Dimensions....
- And a whole lot more...
|
Product Development Inc has been selling and supporting CAD software and Rapid Prototyping equipment for over 12 years. We have won multiple awards for both sales and service. Our company started as a design firm/model shop using Solidworks and 3D Rapid Prototyping equipment to design and build products for our customers. We made a transition over 12 years ago to focus on selling 3D Rapid Prototyping Solutions. We sell Universal Laser System to all companies, individuals, schools and universities. We ask that you please consider us when making a purchasing decision, we have the knowledge and experience to make you successful.
See who trusted us to help them find a solution for their needs.
|
Universal Laser ILS12.75 Laser Features
Air-Cooled Laser Source Because our laser sources are air-cooled, no complicated liquid cooling systems are required.
High Reliability, Excellent Power Stability Our laser sources provide consistent power for predictably excellent processing results.
Laser Fan Control (to reduce noise) Universal’s lasers are all air cooled by computer-controlled fans. Fan speed is reduced or increased as a function of laser temperature, reducing noise levels when the lasers are being used on lower power settings.
Laser Pointer A red laser pointer is installed for easy material alignment.
Patented Cross-Platform Compatibility Laser sources can be freely interchanged between laser platforms.
Patented Free-Space Gas Slab Laser Design Our patented laser sources use free-space gas slab resonators to produce an excellent quality beam with even power distribution and good near and far field characteristics.
Patented Pre-Aligned Laser Sources Laser sources are pre-aligned at the factory and do not need to be internally realigned.
Smart Laser Source Technology Because we manufacture our own lasers, Universal’s lasers can communicate their model number to the laser system CPU, allowing the laser system to automatically choose the right settings for a particular material based on available laser power.
Warranty Available Up To 5 Years Our standard warranty can be extended for up to half a decade of coverage.
Wide Selection of Power Levels Lasers are available at power levels from 10 to 150 watts.
Collimator The Collimator expands and collimates the laser beam, minimizing divergence across the laser processing area producing more consistent focal spot size and energy density.
High Reliability Digital Motors Universal’s laser systems use high quality digital motors which don’t require expensive and complicated optical encoders to function, increasing reliability.
Intelligent Laser Energy Management Engine This feature maintains consistent energy density at any processing speed producing uniform marks and constant depth when cutting, marking and engraving.
Laminated Safety Glass Glass viewing windows creating a safe enclosure for laser processing.
LCD Display PLS/ILS laser systems come equipped with an onboard LCD display, allowing you to move the motion system and Z-axis manually during setup or to change job settings on the fly. This function is useful when determining optimal settings for new applications.
Manual Air Assist (with Optics Protection) Air Assist with Optics Protection creates positive air pressure around all optics and directs compressed air onto the surface of the material being processed. This compressed air keeps debris and particulate and fumes away from the optics, suppresses combustion of fumes, reduces accumulation of particulate on material surface, and increases cut quality on most materials.
Multiple Automatic Focusing Methods All Universal laser systems can be focused automatically based on material thickness or by using a convenient manual focusing tool. Some Universal laser systems can also be automatically focused using special sensors to detect the top surface of the material being laser processed.
Multiple Language Support Supported languages include English, German, Japanese, Spanish, French, Italian, and more.
Over-Temp Alarm (for fire safety) An over temperature alarm installed in every Universal laser system monitors the temperature of the work area. If an unusually high temperature is detected the system will turn off the laser and trigger an audible alarm.
Permanently Sealed Bearings Our sealed, self-lubricating motion system bearings keep dust and debris out, resulting in a longer bearing life.
Stretch-Free Kevlar® Belts Durable belts provide a long life of reliable processing.
Wraparound Top and Front Door The front and top doors of ILS laser systems mate with each other in a clamshell configuration for maximum ease in loading and unloading.
Universal Laser ILS12.75 Laser Specifications
ILS12.75
|
Laser Processing Area (W x H)
|
48 x 24 in (1219 x 610 mm)
|
Maximum Part Size (W x H x D)
|
52.5 x 30 x 12 in (1334 x 762 x 305 mm)
|
Overall Dimension (W x H x D)
|
69 x 44 x 46 in (1753 x 1118 x 1168 mm)
|
Rotary Capacity
|
Max Diameter: 10.25 in (260 mm)
|
Motorized Z Axis Lifting Capacity
|
60 lbs (27 kg)
|
Pass-Through™ Class 4 Mode Accessible Work Area
|
20x ∞in (610x ∞mm)
|
Pass-Through™ Class 4 Mode Clearance
|
23.75 x 8 in (603x203 mm)
|
Standard Focusing Lenses
|
2.0 in (50 mm)
3.0 in (75 mm)
HPDFO™ (High Power Density Focusing Optics)
|
Laser Platform Interface Panel
|
Keypad and LCD display show current file name,
laser power, engraving speed, PPI and run time.
|
Computer Requirements
|
Requires a dedicated PC to operate
Compatible with Microsoft® Windows® 7/8/10 - 32/64 bit
|
PC Connection
|
USB 2.0 or higher
|
Optics Protection
|
Ready for compressed-air-based optics protection
|
Cabinet Style
|
Free-Standing
|
Laser Options
|
10, 25, 30, 40, 50, 60and 75 Watts
Dual Laser Configuration optional
|
Weight
|
430 lbs (215 kg)
|
Power Requirements
|
220V-240V/10A (1 laser)
220V-240V/16A (2 lasers)
|
Exhaust Requirements
|
Two 4 in (102 mm) ports
1000 CFM @ 6 in static pressure (1700 m3/hr at 1.5 kPa)
|
|