|
|
|
Roland VersaUV LEF2-300D Benchtop UV Flatbed Printer The Roland VersaUV LEF2-300D offers a 30.3" x 13" print area for countless product customization possibilities, including printing directly on three-dimensional objects up to 7.87” thick. Featuring a 30” print width, four print heads and two UV-LED lamps for faster curing, the Roland VersaUV LEF2-300D significantly increases productivity and delivers stunning results
|
|
VersaWorks 6 Software Roland VersaUV LEF2-300D printer includes new VersaWorks 6 software. In VersaWorks 6 you can automatically generate white, gloss, and primer layers directly in the software with a special color palette feature. Users can also rotate, set spacing and maintain clip position to give you more control when printing graphics and applying gloss ink effects.
|
|
BOFA PrintPRO Base LEF2-300D Fume Extractor BOFA’s PrintPRO Base LEF2-300D is designed exclusively for Roland DG to remove odors generated during the printing process. The design allows the Roland LEF2-300D printer to sit on top of the extractor as a cart or bench, and specially formed dimples ensure perfect alignment and secure location. Manufactured to run efficiently and quietly in an office environment, color matched for good looks, with practical internal storage and castors for portability, the PrintPRO Base LEF2-300D is the perfect companion to the Roland LEF2-300D Printers..
|
|
Rotaprint For Rotary Printing Printing onto tumblers, bottles, and cylindrical objects is an absolute snap with the new RotaPrint attachment for the Roland VersaUV LEF2-300D flatbed printer. Simple to install and remove, it utilizes the Roland VersaUV LEF2-300D’s existing feed system and enables the Roland VersaUV LEF2-300D to print cleanly and precisely onto a wide range of materials with a diameter between 1.6 to 6.93 inches (40 mm to 176 mm).
|
|
|
|
|
|
|
Roland LEF2-300D Printer Features
Roland VersaUV LEF2-300D Benchtop UV Flatbed Printer The Roland VersaUV LEF2-300D is the latest and greatest of our VersaUV LEF series of flatbed printers. It offers the same brilliant color and direct printing capabilities on a vast array of materials, including three-dimensional items up to 7.87” thick, and now also enables printing larger items and higher quantities. Featuring a 30” print width, four print heads and two UV-LED lamps for faster curing, the Roland VersaUV LEF2-300D significantly increases productivity and delivers stunning results.
Advanced ECO-UV Inks for Outstanding Results Print graphics with incredible detail and color on a virtually unlimited range of promotional products. Designed for flexibility, ECO-UV inks image beautifully and conform around the most complex corners and curves, allowing users to customize everything from gifts and novelties to industrial parts and product prototypes. ECO-UV ink options include high-density white ink for greater brilliance on clear or dark-colored materials and Gloss ink for gloss and matte finishes. Multiple layers of clear ink can be applied to simulate embossing and 3D textures, and the included VersaWorks Dual RIP software comes with 72 ready-to-use texture patterns.
Built to Meet High-Volume Demand In order to maintain accurate high-quality printing, even during long production runs, the Roland VersaUV LEF2-300D Flatbed Printer incorporates precision parts that are not susceptible to changes in temperature or humidity. To meet the needs of high-volume production and manufacturing facilities, the Roland VersaUV LEF2-300D also includes an input/output system for integrating machine status lights and other assembly line tools – enabling scalable production with multiple Roland VersaUV LEF2-300D’s. A height sensor bar made with non-magnetic material, for printing on magnetic items such as iPad covers, while the optional RotaPrint attachment enables users to print onto cylindrical objects.
Supercool Customization of Many Substrates VersaUV LEF2-300D printers run at a low-heat and use state-of-the-art UV-LED lamps. Combined with advanced ECO-UV inks, they offer the ability to print on virtually any material, including: PVC and Plastics, Leather And Fabric, Canvas, Metal, Glass, and Wood
Prep for Profitable Printing with On-Board Primer The Roland VersaUV LEF2-300D features an optional on-board primer cartridge for priming objects quickly and conveniently on a selection of different media substrates. Users can easily prep an object for customization printing Primer ink directly from a file in VersaWorks Dual RIP before printing the full-color graphic. This makes adding graphics to challenging materials much more clean and efficient.
Automatic Height Adjustor When printing on 3D items, the Roland VersaUV LEF2-300D features a height adjuster that automatically moves the flatbed printer table back and forth until it reaches the required height. This automatic function also ensures quality print production by maintaining an optimum distance between the print head and the material surface.
Optional BOFA Air Filtration Unit Combine the Roland VersaUV LEF2-300D with an optional BOFA air filtration system to ensure proper ventilation, while also functioning as a stand and storage unit for fixtures and supplies.
Energy Efficiency The Roland VersaUV LEF2-300D uses an LED for UV-curing that last up to ten times longer than conventional UV lamps and can be instantly switched on or off, giving the user true on-demand production without the typical warm-up time. In addition, the Roland VersaUV LEF2-300D automatically enters a low-power mode when it is not used for an extended period of time.
Ink Flexibility, Efficiency and Consistency Printing around the most complex corners and curves, advanced Roland ECO-UV® inks enable printing on a vast array of shapes and surfaces. The Roland VersaUV LEF2-300D also features an Automated Ink Circulation System that prevents ink pigments from settling in the ink lines for consistently brilliant image quality with a smooth consistency and density, even on long print runs.
Mist Filters To ensure optimum print quality around the curvatures of objects, mist filters are incorporated in the Roland VersaUV LEF2-300D, catching the residual ink that mists when printing off the edge or curvature of a product. This cuts down on overspray and keeps the ink from settling on the printer’s internal components. Filters are designed to be easily replaceable by the end user.
Unmatched Print Quality with Roland Intelligent Pass Control Across a wide variety of applications and media, Roland Intelligent Pass Control technology delivers outstanding image quality in all print modes while eliminating virtually any signs of banding. This patent-pending system ensures that graphics look great when viewed indoors or outdoors, up close and at a distance.
Automated Ink Circulation for Consistent Image Quality on Long Runs When printing on 3D items, the Roland VersaUV LEF2-300D features a height adjuster that automatically moves the flatbed printer table back and forth until it reaches the required height. This automatic function also ensures quality print production by maintaining an optimum distance between the print head and the material surface.
Rotaprint Printing white and CMYK onto bottles and cylindrical objects is an absolute snap with the new RotaPrint attachment for the VersaUV LEF2-300D flatbed printer. Simple to install and remove, it utilizes the LEF2-300D’s existing feed system and enables the Roland VersaUV LEF2-300D to print cleanly and precisely onto a wide range of materials with a diameter between 1.6 to 6.93 inches (40 mm to 179 mm). With its sturdy build, RotaPrint is also consistently and reliably accurate, ensuring precise stepping during rotation.
Roland LEF2-300D Printer Specifications
MODEL
|
Roland VersaUV LEF2-300D
|
Imprintable materials
|
Nearly any Plastic, Nearly any Metal, Leather, Fabric, Wood
|
Loadable Material Size
|
Acceptable maximum material
|
Width: 31.5 inches (800 mm)
Length: 14.2 inches (335 mm) Thickness: 7.87 inches (100 mm)
|
Unit dimensions
|
Width
61.4 inches (1560 mm) Depth 37.6 inches (955 mm) Height 26.6 inches (576 mm)
|
Print Area
|
Maximum Imprintable Width
|
Maximum 30.3 inches (770 mm)
|
Maximum Imprintable Length
|
Maximum 13 inches (330 mm)
|
Colors
|
Full CMYK
|
White
|
Gloss
|
Primer
|
Ink Curing Unit
|
Built-in UV-LED Lamp
|
Print Resolution
|
Maximum 1,440 DPI
|
Distance Accuracy
|
Error of less than ±0.3% of distance traveled, or ±0.3mm, whichever is greater
|
Connectivity
|
Ethernet (10BASE-T/100BASE-TX, automatic switching)
|
Power-Saving Function
|
Automatic sleep feature
|
Power Consumption
|
During operation: Approximately 178 W
|
Acoustic Noise Level
|
60 dB (A) or less
|
Weight
|
366lbs (144 kg)
|
Operation Environment
|
68 to 90°F (20 to 32°C) (72°F / 22°C or higher is recommended) Humidity: 35 to 80% RH (no condensation)
|
Accessories
|
Power cord, RIP & PRINT MANAGEMENT SOFTWARE (Roland VersaWorks 6), user documentation, pad trays, etc.
|
Roland VersaWorks 6 System Requirements
|
Operating system
|
Windows® 10 (32/64-bit) Windows® 8.1 (32/64-bit) Windows® 7 Professional / Ultimate (32/64-bit)
|
CPU
|
Intel® Core™2 Duo, 2.0 GHz or faster recommended
|
RAM
|
2 GB or more recommended
|
Video card and monitor
|
A resolution of 1,280 x 1,024 or more recommended
|
Free hard-disk space
|
40 GB or more recommended
|
Hard-disk file system
|
NTFS format
|
Optical drive
|
DVD-ROM drive
|
Other requirements
|
Ethernet or USB port Internet connection and web browser to use Roland@NET
|
Please note: Considering that you will be using software such as Illustrator, we recommend that you use as high performance computer as possible to reduce RIP processing time.
We also recommend using a hard disk that has large enough capacity, as print files are often tens of GB in size (or larger) when data is high resolution.
|