 |
 |
 |
 |
***PDI Exclusive - You can only buy it here.***
PDI Engraving Kit
We created a kit that will turn your Roland milling machine into a complete engraving system. We include an engraving mat, software, tools and starter materials, everything you need to get started.
Receive this free with purchase of Roland MDX-540SA, MDX-540S, MDX-540A, MDX-540, MDX-50, MDX-40A, SRM-20 Contact sales@pdi3d.com to learn how.
How It Works
- Set the engraving mat down on the table of your Roland milling machine. (The engraving mat is better then 2 sided tape because the sheets are reusable and when you remove the engraved item it does not leave any residue behind.
- Place the material or item you want to engrave onto the engraving mat. You just set it down and press it into the mat and it holds it in place.
- Load the engraving tool into the machine and set the z origin on top of the item or material.
- Using the Engrave Software import your design (you can import all vector and bitmap file types) or you can create a new design from scratch. Once your design is created you choose your material type and engraving parameters.
- Set the location on your part where you want the machine to engrave.
- Choose Engrave in the software and the machine will engrave your item.
Included Items
Engrave Software (Download) 1 Engraving Tool 4 Pieces Starter Engraving Material 1 Engraving Mat
Compatibility Use with the Roland MDX-540SA, MDX-540S, MDX-540A, MDX-540, MDX-50, MDX-40A, MDX-40, SRM-20, MDX-20, MDX-15
|
|
 |
 |
 |
 |

|