Use with the VLS Desktop Laser Series
VLS2.30DT, VLS3.60DT, VLS2.30 and VLS3.50
Not for use with VLS/PLS Platform Series
Universal Laser 1.5” Lens Kit assembly has been designed for very high resolution engraving and etching of extremely small fonts and photos. This lens will give an additional 1/2” (12.7mm) to the table height (Z axis) allowing for taller parts to be processed however because it is the closest lens to the work area, it can have a greater chance of being contaminated due to that proximity to laser processing. The 1.5” tolerance is low and cannot handle much deviation from the focus point. Because of high divergence it will not be a good thick cutting lens on materials thicknesses over 0.2” or 5.08mm. It can be interchanged with any other available lens and is available on all PLS and VLS series systems as well as most older generations of Universal Laser Systems.