|
|
|
|
|
|
Roland MDX-20
|
List Price: $4,695.00
Our Price: $4,495.00 Used MDX-20 for sale $3200.00 Call for details
You Save $200.00
|
|
|
Roland MDX-20 3D Milling and Scanning System
|
|
|
|
|
|
|
|
|
|
|
|
|
Roland MDX-15
|
List Price: $3,145.00
Our Price: $2,995.00
You Save $150.00
|
|
|
Roland MDX-15 3D Milling and Scanning System
|
|
|
|
|
|
|
|
|
|
|
|
|
Safety Cover (MDX-15)
|
List Price: $249.99
Our Price: $249.99
|
|
|
The Safety Cover Encloser keeps the MDX-15 completely enclosed reducing noise while protecting the machine as well.
|
|
|
|
|
|
|
|
|
|
|
|
|
Spindle Unit 1/4in (MDX-15)
|
List Price: $99.99
Our Price: $99.99
|
|
|
Replacement or spare 1/4 in. Spindle Unit for the MDX-15 and MDX-20. Replacement of the spindle unit is easy and can be done in a matter of minutes. Spindle unit should be replaced after approximately 700 hours of use.
|
|
|
|
|
|
|
|
|
|
|
|
|
Spindle Unit 1/8in (MDX-15)
|
List Price: $99.99
Our Price: $99.99
|
|
|
Replacement or spare 1/8 in. Spindle Unit for the MDX-15 and MDX-20. Replacement of the spindle unit is easy and can be done in a matter of minutes. Spindle unit should be replaced after approximately 700 hours of use.
|
|
|
|
|
|
|
|
|
|
|
|
|
Spindle Unit 3mm (MDX-15)
|
List Price: $99.99
Our Price: $99.99
|
|
|
Replacement or spare 3mm. Spindle Unit for the MDX-15 and MDX-20. Replacement of the spindle unit is easy and can be done in a matter of minutes. Spindle unit should be replaced after approximately 700 hours of use.
|
|
|
|
|
|
|
|
|
|
|
|
|
Spindle Motor Unit (MDX-15)
|
List Price: $89.99
Our Price: $89.99
|
|
|
Replacement Spindle Motor Unit for the MDX-15 and MDX-20. Replacement of the spindle motor unit is easy and can be done in a matter of minutes. Spindle motor should be replaced after approximately 700 hours of use.
|
|
|
|
|
|
|
|
|
|
|
|
|
Carbide End Mill, 1/4in shank, 2-flute ball
|
List Price: $49.99
Our Price: $49.99
|
|
|
This ball end mill is made of cemented carbide for high strength and long tool life. 2 flute design has a the greatest amount of space for more chip carrying capacity. It has a 1/4" tip size, 1/4" shank, and 3.0" overall length.
|
|
|
|
|
|
|
|
|
|
|
|
|
Carbide End Mill, 1/8in, 1/32in tip, 3-flute ball
|
List Price: $44.99
Our Price: $44.99
|
|
|
This ball end mill is made of cemented carbide for high strength and long tool life. 3 flute design has a larger cross section for even greater strength. It has a 1/32" tip size, 1/8" shank, and 2.5" overall length.
|
|
|
|
|
|
|
|
|
|
|
|
|
Carbide End Mill, 1/8in, 1/16in tip, 3-flute ball
|
List Price: $44.99
Our Price: $44.99
|
|
|
This ball end mill is made of cemented carbide for high strength and long tool life. 3 flute design has a larger cross section for even greater strength. It has a 1/16" tip size, 1/8" shank, and 2.5" overall length.
|
|
|
|
|
|
|
