Knowledge Base:  

You are here: Knowledge Base : Part
Page of 1
Where do I get a part lists for my machine?
You can get a parts list for your machine by going to this page and accepting the terms and conditions. Parts List Request
Do I need to do ROUGHING passes with each tool?
When I use Roughing it does not cut out the small holes and then when I finish the small tool goes into the hole and then breaks why? 3 different scenarios to consider with this question
I want to use an alternative CAM software? Learning about RML/G-CODE/NC-CODE,
Here is some info on using alternative CAM programs with the Roland milling machines. What is G-Code/NC-Code/RML Language/command sets ect? When people talk about G-Code they are basically talk
Download Troubleshooting and Error Codes Guide
If you have an issue with your Roland CNC machine or it gives you an error code please download the correct troubleshooting guide below and look at the troubleshooting info and error code list. This w
How do I turn off material size restrictions in SRP Player?
When you need to make a part or have material that is just a little larger then what Roland SRP Player will allow on the rotary axis unit you can turn off the safety features of SRP Player software. O
What settings should I use to save an STL file from Solidworks?
When your part is complete save it as you would normally. So you do not loose any of your work. Now go to the File menu and click SAVE AS… The Save As dialogue box below will pop up. Scroll through