HOME > PARTS & ACCESSORIES > UNIVERSAL LASER > VLS6.60/6.75 >

Universal Laser VLS6.75 Cutting Table
Universal Laser VLS6.75 Downdraft Cutting Table
 
Retail Price: $1,703.00
Sale Price: $1,683.00



Availability: Usually Ships in 24 to 48 Hours

DESCRIPTION
 
Universal Laser VLS6.75 and VLS6.60 Downdraft Cutting
The Flow-Through / Downdraft Cutting Table consists of a thin-wall aluminum honeycomb-core evenly supported by an underlying hollow structure. The exhaust ports match up with the table to create a suction on the table surface. The engraving/cutting material is placed on the honeycomb core and the suction holds the material in place while it is being engraved or cut.

Damage Free Laser Cutting
When cutting material with a laser, a nominal amount of excess laser power must pass beyond the lower surface of the material to ensure a complete cut. On the standard laser table, this excess laser power can damage the lower surface of the material being cut as it reflects off of the table surface. The ULS Flow-Through / Downdraft Cutting Table minimizes the supporting surface for the material, preventing damaging back-reflection as well as allowing laser cutting by-products (smoke and cut material) to be more effectively removed.

Enables Coaxial Gas Assist
Nearly all laser cutting applications benefit from coaxial gas-assist. With a standard, solid laser processing support surface, it is not possible to use coaxial gas assist for laser cutting processes as the pressurized gas introduced at the focal point of the laser beam can flow under the target material and lift it off of the supporting surface. The honeycomb-core material allows the coaxial gas and laser cutting byproducts to flow into the structure of the cutting table where it is carried out of the system through the ducted exhaust plenum.