|
|
|
|
|
|
Rotary Axis Unit for MDX-40
|
List Price: $4,995.00
Our Price: $4,495.00
You Save $500.00
|
|
|
The rotary axis is designed for unattended milling. It enables easy and precise milling of a wide variety of objects with a two- or four-sided strategy. Milling can be performed from any angle between 0 and 360 degrees.
|
|
|
|
|
|
|
|
|
|
|
|
|
Roland MDX-40 Self Centering Vise
|
List Price: $695.00
Our Price: $695.00
|
|
|
Allows you to build large models and prototypes with ease.
|
|
|
|
|
|
|
|
|
|
|
|
|
PC Board Design & Build Kit
|
List Price: $695.00
Our Price: $695.00
|
|
|
PCB Prototyping Kit is a complete package to retrofit your MDX machine to manufacture PCB boards. The kit comes with software, tools, and a sample material kit.
|
|
|
|
|
|
|
|
|
|
|
|
|
Dust Box (MDX-40)
|
List Price: $495.00
Our Price: $495.00
|
|
|
Dust Colllection Box mounts under the MDX-40 and is used to collect the cut chips. When the sliding drawer is full, simply remove the draw and dispose of the cut chips.
|
|
|
|
|
|
|
|
|
|
|
|
|
3D Scanning Sensor Unit (MDX-40)
|
List Price: $495.00
Our Price: $495.00
|
|
|
The addition of the ZSC-1 Scanning Probe will give the MDX-40 the ability to scan objects using the large flat table.
|
|
|
|
|
|
|
|
|
|
|
|
|
Spindle Unit (JWX-10/MDX-40)
|
List Price: $330.00
Our Price: $330.00
|
|
|
Replacement spindle for the MDX-40 and the JWX-10. Spindle can be easily replaced in a matter of minutes and comes with a spare spindle belt. Spindle should be replaced after 2,000 hours of use.
|
|
|
|
|
|
|
|
|
|
|
|
|
Roland MDX-40 Prototyping Tool Kit
|
List Price: $261.94
Our Price: $225.00
You Save $36.94
|
|
|
Kit containing six tools for all your basic milling needs.
|
|
|
|
|
|
|
|
|
|
|
|
|
Burnishing Adapter (EGX 30/300, CS-20)
|
List Price: $129.99
Our Price: $129.99
|
|
|
Burnishing Adapter for EGX-300/PNC-2300A
|
|
|
|
|
|
|
|
|
|
|
|
|
Roland MDX-40 Training Kit
|
List Price: $99.00
Our Price: $99.00
|
|
|
Without training you can not take full advantage of your investment. Do not foolishly let a dealer tell you that you do not need training. It is the difference in completing projects the week your machine arrives or 3 months after.
We have put together a complete training kit that includes a multimedia CD, tools, and enough material to complete the training project twice. Simply put the Training CD into your CD drive on your computer and the training explains step by step the setup of the machine from the minute you take it out of the box. After setup the training transitions into a hands-on application based project. In the process of completing the project you will learn to use the software and machine.
While working through the setup and training we are available by phone for assistance and to answer questions. No matter what kind of experience with equipment and software you have, when you finish the training you will be ready to cut your own projects. The training CD allows you to train at your own pace. It can be stopped and restarted when you need.
|
|
|
|
|
|
|
|
|
|
|
|
|
Carbide End Mill, 1/4in shank, 2-flute ball
|
List Price: $49.99
Our Price: $49.99
|
|
|
This ball end mill is made of cemented carbide for high strength and long tool life. 2 flute design has a the greatest amount of space for more chip carrying capacity. It has a 1/4" tip size, 1/4" shank, and 3.0" overall length.
|
|
|
|
|
|
|
