Home > Jewelry Design >

  Roland JWX-30
  Roland JWX-30
Click for More Photos
  
Our Price: $17,895.00
For a limited Time $14,995.00


Availability: Usually Ships in 24 Hours
Product Code: JWX-30
Qty:

Description Features Technical Specs
 
Cuttable MaterialModeling wax
X, Y, and Z Operation StrokesX, Y, and Z: 305 x 205 x 100 mm (12 x 8.1 x 3.9 in.)
ConnectivityUSB (compliant with Universal Serial Bus Specification Revision 1.1)
POWER REQUIREMENTS
Voltage and FrequencyAC 100 to 120 V/220 to 240 V ±10%, 50/60 Hz (overvoltage category II, IEC 60664-1)
Required Power Capacity2.8 A (100 to 120 V)/1.2 A (220 to 240 V)
Power Consumption275 W
DimensionsHeight x width x depth: 606 x 656 x 557 mm (23.9 x 25.9 x 22 in.)
Weight47 kg (104 lb)
EnvironmentalOperating environment: Temperature of 5 to 40°C (41 to 104 °F), 35 to 80% relative humidity (no condensation) Ambient pollution degree: 3 (as specified by IEC 60664-1)
AccessoriesPower cord, Handy panel, Tools for modeling (ball end mill, diameter 3.175mm /conical end mill, diameter 3.175 mm), collet (diameter 3.175 mm), detection pin, hexagonal screwdriver, hexagonal wrench, cap screws (10), spanner (10 mm, 17mm), modeling wax, clamp holder, square clamp (large), square clamp (small), swivel clamp, tube clamp, dust tray, blower fan, User’s Manual (this document), SRP Player Installation and Setup Guide, SRP Player CD-ROM, Roland Software Package CD-ROM, Roland JewelStudio DVD-ROM
SYSTEM REQUIREMENTS
ComputerModel preinstalled with Windows Vista, XP, 2000, or upgraded computer originally preinstalled with Windows 2000 or later
Pentium, Celeron, or higher processor
1 GB disk space
512 MB RAM (1 GB or more recommended)
OpenGL graphic card recommended
IntelliMouse recommended
USB cableUse a shielded cable up to three meters (10 ft.) in length



 Share your knowledge of this product with other customers... Be the first to write a review.



Browse for more products in the same category as this item:

Jewelry Design
Milling Machines
Roland JWX-30


Blade, 45 degree carbide, Single pack (CAMM-1) $18.99
Engraving Accessories Starter Kit (EGX-400/600) $999.99
Automatic Tool Changer (MDX-540) $7,995.00
Carbide End Mill, 1/8in, 1/16in tip, 3-flute ball $44.99
Carbide End Mill, 3/8in shank, 2-flute flat $34.99
Roland EGX-30A $3,399.00
Carbide Tip Engraving Cutter, 0.010in, 1/8in shank, w/knob $19.00
Roland MDX-40 Self Centering Vise $695.00
Roland CAMM-1 GX-24 $1,999.00